Physical Modelling of Blue Mussel Dropper Lines for the Development of Surrogates and Hydrodynamic Coefficients
- verfasst von
- Jannis Landmann, Thorsten Ongsiek, Nils Goseberg, Kevin Heasman, Bela H. Buck, Jens André Paffenholz, Arndt Hildebrandt
- Abstract
In this work, laboratory tests with live bivalves as well as the conceptual design of additively manufactured surrogate models are presented. The overall task of this work is to develop a surrogate best fitting to the live mussels tested in accordance to the identified surface descriptor, i.e., the Abbott-Firestone Curve, and to the hydrodynamic behaviour by means of drag and inertia coefficients. To date, very few investigations have focused on loads from currents as well as waves. Therefore, tests with a towing carriage were carried out in a wave flume. A custom-made rack using mounting clamps was built to facilitate carriage-run tests with minimal delays. Blue mussels (Mytilus edulis) extracted from a site in Germany, which were kept in aerated seawater to ensure their survival for the test duration, were used. A set of preliminary results showed drag and inertia coefficients C D and C M ranging from 1.16-3.03 and 0.25 to 1.25. To derive geometrical models of the mussel dropper lines, 3-D point clouds were prepared by means of 3-D laser scanning to obtain a realistic surface model. Centered on the 3-D point cloud, a suitable descriptor for the mass distribution over the surface was identified and three 3-D printed surrogates of the blue mussel were developed for further testing. These were evaluated regarding their fit to the original 3-D point cloud of the live blue mussels via the chosen surface descriptor.
- Organisationseinheit(en)
-
Ludwig-Franzius-Institut für Wasserbau, Ästuar- und Küsteningenieurwesen
Geodätisches Institut
Leibniz Forschungszentrum FZ:GEO
- Externe Organisation(en)
-
Technische Universität Braunschweig
Alfred-Wegener-Institut (AWI) Helmholtz-Zentrum für Polar- und Meeresforschung
Hochschule Bremerhaven
Cawthron Institute
- Typ
- Artikel
- Journal
- Journal of Marine Science and Engineering
- Band
- 7
- Publikationsdatum
- 03.2019
- Publikationsstatus
- Veröffentlicht
- Peer-reviewed
- Ja
- ASJC Scopus Sachgebiete
- Tief- und Ingenieurbau, Gewässerkunde und -technologie, Meerestechnik
- Elektronische Version(en)
-
https://doi.org/10.3390/jmse7030065 (Zugang:
Offen)
https://doi.org/10.15488/10173 (Zugang: Offen)
